Air Quality Monitor Bundle by Airthings

Easy & fast setup for complete home monitoring

Air Quality Monitor Bundle by Airthings

Monitor radon and other dangers in your living room and bedroom simultaneously

Start your indoor air quality journey with monitors that cover two of the rooms where you spend the most time at home. Enjoy broad visibility into your home's air quality in the comfort of your living room. Monitor your exposure to radon, as well as the concentration of particulates and gases, temperature, and humidity – all while spending time with your loved ones. With Wave Plus in your bedroom, you'll learn if your air is sufficiently ventilated and if other invisible factors might be affecting your sleep.

Set the easy-to-read and inobtrusive display to show the sensor readings you check most often. Runs cable-free on batteries for up to 2 years or plug it in - your choice. View Plus can act as an internet hub for your multiroom system to bring always-on access to your Wave monitors.

Check live readings, analyze trends using sophisticated graphs, configure notifications and get air quality tips. Check your live data anytime and receive timely air quality notifications wherever you are. Trigger home automation with IFTTT and use voice commands with Google Assistant and Amazon Alexa.


Key Features:

  • Sensors: Radon, particulate matter (PM2.5), Carbon dioxide (CO2), temperature, humidity, airborne chemicals (VOC), air pressure
  • Display: 2.9” 296128 pixels ePaper
  • Visual indicator: Red/yellow/green glow indicator
  • Long battery life: Up to 2 years (depends on sensor interval and WiFi router)
  • Optional operation on USB-C (runs from batteries if removed)
  • Supports wall mounting or placement on table
  • Wireless connection: WiFi or Airthings SmartLink (with Hub)
  • Bluetooth for on boarding and daily use configuration
  • Hub functionality: Enabled when connected with WiFi and USB-C cable is plugged into device (not compatible with Wave Radon 1st Gen SN: 2900xxxx)
  • Radon sampling: Passive diffusion chamber
  • Detection method: Alpha spectrometry
  • Measurement range: 0 – 500 pCi/L / 0 – 20,000 Bq/m3
  • Accuracy/precision at 5.4 pCi/L / 200 Bq/m3: After 7 days ~ 10 % After 2 months ~ 5 %
  • Sensor sampling interval:
    5 minutes
  • Sensor Resolution:
    Temperature ∓ 0.1°C / F
    Humidity ∓1%
    Pressure ∓0.15hPa
  • Initial calibration time:
    VOC ~7 days
    CO2 ~7 days
  • CO2 details:
    NDIR Sensor (Non-Dispersive Infra-Red):
    Measurement range 400–5000 ppm
    Optimum Accuracy ±50ppm ±3% within 10 – 35°C / 50 - 95°F and 0 – 80%RH after initial calibration time
  • Particulate Matter (PM2.5) details:
    Laser scattering based optical particle counter
    Particle size detection range: 300 nm to 10 μm
    Range: 0~200 μg/m³
    Measurement error (PM2.5): 0 ~100μg/m3, ±10μg/m3,100 ~200 μg/m3, ±10%. Calibrated with a GRIMM using cigarette smoke source
  • Recommended operating conditions:
    Temperature: 4°C to 40°C / 39.2°F to 104°F
    Humidity: 0% to 85% (non condensing)
  • Weight: 360 g / 12.7 oz (with batteries, without cable)
  • Dimensions: 17 cm (length) x 9 cm (height) x 3.3 cm (width)
  • Power: 6 AA batteries or USB-C
  • Connectivity: WiFi (2.4 GHz and 802.11b/g/n), Airthings SmartLink & Bluetooth Low Energy
  • Privacy: Noise Indicator used for measuring sound pressure level only, no privacy concerns (only enabled for Airthings for Business)

Wave Plus (now in limited edition black) is the bluetooth-enabled, smart monitor with 6 sensors measuring radon, CO2, VOCs and more!

Good, healthy air quality is essential to getting restful sleep at night and being on top of your game during the day. High levels of CO2 in your air caused by insufficient ventilation weaken your ability to focus, make the best decisions, and perform to your potential. Stay in control of your home’s air quality with Airthings Wave Plus, an app-enabled indoor air monitor that measures 6 aspects of air quality including radon, carbon dioxide (CO2), and more.

It syncs live readings with the Airthings Wave app on your mobile device via Bluetooth. Set it on a surface or mount it on a wall, it's battery-powered so there are no messy cables.

About Airthings:

Established in 2008, Airthings is a global tech company led by a team of experienced scientists, engineers, developers and visionaries, with a common goal: to educate on the prevalence of radon, as well as other indoor air contaminants, and develop accessible technology solutions to help people stay healthy.

Every idea starts with a problem: radon testing for homeowners hasn’t improved in almost 30 years.

Several scientists working together at CERN (European Organization for Nuclear Research) saw a gap in the radon market—or more like a deadlock. Traditionally, consumers only had two options: call a professional to test their radon levels, or purchase a single-use charcoal test which was then sent to a lab for the results.

We started Airthings to break free from these traditions and put consumers, as well as business owners back in control of their indoor air quality.

From there, we saw that there were other dangers hiding in the air we breathe, not only radon but other contaminants. We went to work researching these contaminants and finding ways that we could help not only consumers, but offices, schools and HVAC professionals make safer air quality decisions for the masses. We also saw that we could help with energy efficiency.




Gadgets, games, and gizmos galore! Sci-Fi 3D covers the best in tech and much more for all your shopping needs this holiday season.

Skip to toolbar